Texas Architect License: Degree,
AXP, ARE and Registration

Texas architect license at a glance

This guide is general information about Texas licensing, not legal advice. TBAErules, fees and deadlines change — confirm your own position with the board, or with a licensed attorney, before you rely on anything here.

Texas architect license types: the full TBAE ladder

Architecture's ladder is unusually well-defined because NCARB standardised it: degree, experience programme, examination, registration — then the Certificate that makes the registration portable. What differs between states, and what the tiers below reflect for Texas, is the layer the board adds on top and how firms are regulated.

Exact experience hours and fees vary by license type and can change, confirm current requirements on the TBAE Architect program page.

Texas registration vs NCARB Certificate Architect in Texas, what is the difference?

How do you get a Texas Registered Architect (TBAE) Architect license?

1. 1

   Earn an NAAB-accredited professional degree

   The education requirement is a professional degree accredited by the National Architectural Accrediting Board — most commonly a Bachelor of Architecture or a Master of Architecture. A pre-professional degree in architectural studies is not the same thing, and this distinction costs students years when they discover it late. Verify a programme's current accreditation status with NAAB directly rather than relying on a university's prospectus.

2. 2

   Establish an NCARB Record and start the AXP

   Open an NCARB Record early — ideally while still a student — because it is the container for your experience, your examination results and, eventually, your Certificate. Then log Architectural Experience Program hours under a supervising architect across NCARB's practice areas. The breadth requirement is the part to plan for: hours in one narrow area, however numerous, will not complete the programme, so raise coverage with your supervisor early rather than discovering the gaps at the end.

3. 3

   Pass all six ARE divisions

   The Architect Registration Examination is delivered in six divisions covering practice management, project management, programming and analysis, project planning and design, project development and documentation, and construction and evaluation. Divisions may be taken in any order and are passed individually, subject to NCARB's rolling clock rules, which is why most candidates sequence them against the experience they are currently accumulating. NCARB publishes current content, fees and scheduling — check at source, since they change.

4. 4

   Satisfy the Texas requirements and register

   Texas registers architects through the Texas Board of Architectural Examiners, a dedicated regulator rather than a division of a general licensing department — and one that also handles landscape architects and registered interior designers. The path follows the NCARB model: an NAAB-accredited professional degree, the Architectural Experience Program, and all six divisions of the Architect Registration Examination, followed by registration with the board. Texas has historically been an attractive jurisdiction for reciprocal registration because of its scale and construction volume, and TBAE handles a substantial reciprocal caseload from NCARB Certificate holders. The board sets its own registration, renewal and continuing-education requirements, including state-specific components, and revises them by rule — confirm the current position with TBAE before applying. Apply to the Texas Board of Architectural Examiners once you have satisfied its requirements. Boards set their own fees, application processes and any state-specific examination or jurisprudence component by rule and revise them, so take the current requirements from the board rather than from a summary — including this one.

5. 5

   Get the NCARB Certificate and keep everything current

   Once registered, obtaining the NCARB Certificate is the single most useful career step available to an architect, because it converts a state registration into something close to national mobility: most jurisdictions will register a Certificate holder without re-establishing education, experience and examination. After that, track two cycles — the board's registration renewal with its continuing-education requirement, and the Certificate's own maintenance — and note that a lapsed registration means you may not seal drawings, whatever the state of your competence.

Does a Texas architect license transfer to other states?

Architecture has the most orderly reciprocity system of any licensed profession, and it runs through the NCARB Certificate. Once you hold the Certificate — documenting that you met the standard education, experience and examination requirements — nearly every jurisdiction will register you without re-establishing them, which is why architects move between states far more easily than engineers, surveyors or attorneys. What the Certificate does not always dispose of is a state-specific requirement: the TBAE may impose its own jurisprudence or state-law component, and it sets that by rule. Confirm the current reciprocal registration requirements with the board before relying on the Certificate alone.

Reciprocity agreements change, always confirm the current list and requirements on the TBAE Architect program page before applying.

How much does a Texas architect license cost, and how long does it take?

Three separate payees are involved and it is worth budgeting for all of them. The Texas Board of Architectural Examiners publishes its application, registration and renewal fees and revises them by rule. NCARB charges for the Record, for each ARE division and for the Certificate, on its own published schedule. And the professional degree is by a wide margin the largest cost in becoming an architect, ahead of everything the licensing process itself charges.

Texas architect examination requirements and licence lookup

What is examined, and how do you verify a Texas architect?

The Architect Registration Examination has six divisions: practice management, project management, programming and analysis, project planning and design, project development and documentation, and construction and evaluation. It is written and administered by NCARB, results are reported pass or fail against a competency standard rather than as a percentage, and divisions are passed individually under NCARB's rolling clock rules. Confirm with the TBAE whether it imposes any state-specific examination or jurisprudence requirement alongside the ARE, since boards set these by rule and revise them.

How to verify a Texas architect license

Verify a Texas architect through the Texas Board of Architectural Examiners using the tbae registrant search. Check that the registration is active rather than merely issued, because an architect whose registration has lapsed may not seal drawings regardless of experience, and sealed drawings from a lapsed registrant create problems at permit review. Where a firm is offering architectural services, check the business registration as well as the individual, since these are separate requirements. GlobalCybers verifies registration status, the seal authority and any firm registration before placing architectural staff.

How do you become a licensed architect in Texas?

Earn a professional degree from an NAAB-accredited architecture programme, establish an NCARB Record and complete the Architectural Experience Program under a supervising architect, pass all six divisions of the Architect Registration Examination, and register with the Texas Board of Architectural Examiners.

Texas registers architects through the Texas Board of Architectural Examiners, a dedicated regulator rather than a division of a general licensing department — and one that also handles landscape architects and registered interior designers. The path follows the NCARB model: an NAAB-accredited professional degree, the Architectural Experience Program, and all six divisions of the Architect Registration Examination, followed by registration with the board. Texas has historically been an attractive jurisdiction for reciprocal registration because of its scale and construction volume, and TBAE handles a substantial reciprocal caseload from NCARB Certificate holders. The board sets its own registration, renewal and continuing-education requirements, including state-specific components, and revises them by rule — confirm the current position with TBAE before applying.

Who licenses architects in Texas?

The Texas Board of Architectural Examiners. Texas runs a dedicated architectural regulator rather than folding architects into a general professions department, and it registers architects, landscape architects and interior designers under one board. That is the body to contact about applications, reciprocal registration, firm registration, renewal and any state-specific requirement,

and it is the authority whose current rules govern — not NCARB, which standardises the national path but does not license anyone.

Texas Architect licenses, Frequently Asked Questions

Texas Board of Architectural Examiners · Texas Board of Architectural Examiners, registrant search · NCARB, the path to architectural licensure · NCARB, Architect Registration Examination (ARE 5.0) · NCARB, Architectural Experience Program (AXP) · National Architectural Accrediting Board, accredited programmes · U.S. Bureau of Labor Statistics, OEWS May 2025 (17-1011). Fees and rules can change, confirm current details at www.tbae.texas.gov before applying.

TBAE credentialed? Find a job.

We verify your TBAE credential and match you with permanent employers in Texas. Renewal fees paid after placement.