How do you get a Tennessee civil engineer license (Tennessee Board of Architectural and Engineering Examiners)?
To be licensed as a civil engineer in Tennessee, earn a bachelor's degree from an ABET-accredited engineering programme, pass the NCEES Fundamentals of Engineering examination to become an engineer in training, complete about four years of progressive engineering experience under a licensed professional engineer, and pass the NCEES PE Civil examination with the depth module matching your practice area, then apply to the Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance. Tennessee licenses professional engineers through the Board of Architectural and Engineering Examiners at the Department of Commerce and Insurance — a combined board covering architects, engineers, landscape architects and registered interior designers, which is a different structure from the dedicated engineering boards found in larger states. The path itself is the national one: an ABET-accredited degree, the NCEES Fundamentals of Engineering examination, progressive experience under a licensed professional engineer, and the NCEES PE Civil examination with the depth module matching your practice. Tennessee's civil engineering work is shaped by its topography and hydrology — Appalachian terrain, karst geology across much of Middle Tennessee, and river and reservoir systems — and by a construction market growing quickly around Nashville. Confirm current experience, examination and comity requirements with the board. Only a PE may seal engineering documents and take responsible charge of work offered to the public.
- Complete a bachelor's degree from an ABET-accredited engineering programme.
- Pass the NCEES Fundamentals of Engineering examination and register as an engineer in training.
- Accumulate about four years of progressive engineering experience under a licensed professional engineer.
- Pass the NCEES PE Civil examination with the appropriate depth module, and any Tennessee-specific examination the Tennessee Board of Architectural and Engineering Examiners requires.
- Apply to the Tennessee Board of Architectural and Engineering Examiners for licensure, and maintain it with the board's continuing professional development requirement.
Governing law: Tennessee engineering and architecture law (Tennessee Code Annotated, Title 62, Chapter 2)
Tennessee civil engineer license at a glance
This guide is general information about Tennessee licensing, not legal advice. Tennessee Board of Architectural and Engineering Examinersrules, fees and deadlines change — confirm your own position with the board, or with a licensed attorney, before you rely on anything here.
Tennessee civil engineer license types: the full Tennessee Board of Architectural and Engineering Examiners ladder
Engineering's ladder is short and well-defined: graduate, engineer in training, professional engineer — with comity and specialty credentials layered on afterwards. What differs between states, and what matters in Tennessee, is the layer the board adds. Tennessee regulates architects, engineers, landscape architects and interior designers through a single combined board, which keeps the design professions unusually close together here.
Engineering graduate
Working in an engineering office under a licensed PE immediately after graduation. The work is real engineering, but it is performed under someone else's responsible charge, and the title used should not imply licensure — boards enforce title protection.
Engineer in Training / Engineer Intern
The standing reached by passing the NCEES Fundamentals of Engineering examination, usually taken in the final year of the degree. It confirms you are on the licensure path and it is the point from which most boards count qualifying experience most cleanly.
Professional Engineer (Tennessee Board of Architectural and Engineering Examiners)
The credential this page covers: licensure by the Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance, authorising you to seal engineering documents and take responsible charge of engineering work offered to the public in Tennessee. It carries personal legal responsibility for the work sealed under it.
Comity applicant
The route for an engineer already licensed elsewhere. NCEES examination results and the NCEES Record transfer readily, so a second-state licence is usually a matter of application rather than re-examination — though the Tennessee Board of Architectural and Engineering Examiners sets its own requirements and may impose a state law or rules component.
Structural engineering licensure
Several states operate a separate structural engineer licence or title authority above the civil PE, requiring the NCEES Structural Engineering examination. It matters most for significant or high-seismic structures, and whether it applies depends on the state and the building — confirm before taking responsible charge of structural design.
Engineering business certification
A firm offering engineering services to the public is regulated separately from the engineers in it, typically requiring registration or a certificate of authorisation with a designated responsible engineer. Firms entering a new state overlook this far more often than individuals overlook their own licence.
Land surveying
A separate licensed profession. A PE licence does not authorise land surveying, and a surveying licence does not authorise engineering.
Specialty certifications
Diplomate status through the academies of the American Society of Civil Engineers, envelope and building science credentials, and discipline certifications in areas such as erosion control and stormwater. None replaces the PE, and all sit on top of it as evidence of specialisation.
Exact experience hours and fees vary by license type and can change, confirm current requirements on the Tennessee Board of Architectural and Engineering Examiners Civil Engineer program page.
FE exam (EIT) vs PE Civil exam (licence) Civil Engineer in Tennessee, what is the difference?
How do you get a Tennessee Professional Engineer (Tennessee Board of Architectural and Engineering Examiners) Civil Engineer license?
- 1
Earn an ABET-accredited engineering degree
The education requirement is a bachelor's degree from a programme accredited by ABET's Engineering Accreditation Commission. This distinction matters: an engineering technology degree, though ABET-accredited under a different commission, is treated differently by many boards and can add requirements or close routes entirely. Verify the accreditation of a specific programme with ABET directly, and confirm with the Tennessee Board of Architectural and Engineering Examiners how it treats your particular degree if it is not a straightforward engineering bachelor's.
- 2
Pass the FE examination and register as an EIT
The NCEES Fundamentals of Engineering examination is a computer-based examination covering engineering fundamentals, normally taken in the final year of the degree while the material is fresh — candidates who defer it for several years consistently find it harder, not easier. Passing establishes engineer in training standing. Register that standing with the board, because it is the cleanest way to have your qualifying experience recognised from the right date.
- 3
Accumulate progressive engineering experience
About four years is the common requirement, but the qualifying concept is progressive experience under a licensed professional engineer — work involving engineering judgement and increasing responsibility, not simply time in an engineering office. Boards read experience records carefully for evidence of judgement exercised rather than tasks completed. Have your supervising PE verify the record as you go, and confirm the specific requirement with the Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance, which sets it by rule.
- 4
Pass the PE Civil examination and any state paper
The NCEES PE Civil examination combines a breadth component across civil engineering with a depth module you select — construction, geotechnical, structural, transportation, or water resources and environmental — matched to your practice. Confirm with the Tennessee Board of Architectural and Engineering Examiners whether it requires a state law, rules or jurisprudence component alongside the national examination, since boards set these by rule and revise them.
- 5
Apply, then maintain the licence
Apply to the Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance with your verified experience record and examination results. Once licensed you may seal engineering documents and take responsible charge of engineering work in Tennessee, which is a personal legal responsibility that outlives the project. Maintain the licence through the board's continuing professional development requirement, and keep an NCEES Record if you expect to practise in more than one state — it makes every subsequent comity application dramatically simpler.
Does a Tennessee civil engineer license transfer to other states?
Engineering calls it comity rather than reciprocity, and it works comparatively well because the examinations are national. A PE licensed in one state can generally obtain licensure in another by application to that board, and the NCEES Record — a centrally verified file of your education, examinations, experience and references — removes most of the friction. It is still a fresh application to each board rather than an automatic transfer, and each board applies its own current requirements. Confirm the current comity requirements with the Tennessee Board of Architectural and Engineering Examiners, including any state law or rules component.
Reciprocity agreements change, always confirm the current list and requirements on the Tennessee Board of Architectural and Engineering Examiners Civil Engineer program page before applying.
How much does a Tennessee civil engineer license cost, and how long does it take?
NCEES charges the FE and PE examination fees on its published schedule and charges separately for an NCEES Record. The Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance charges application and licence fees, set by rule and revised — take current figures from the board. The degree and the four years of supervised practice are the real investment, and both are paid rather than paid for.
Tennessee professional engineer examinations and licence lookup
What is examined, and how do you verify a Tennessee PE?
Two national examinations, both written by NCEES and reported pass or fail against a competency standard rather than as a percentage. The Fundamentals of Engineering examination covers engineering fundamentals across the discipline and establishes engineer in training standing. The PE Civil examination combines civil breadth with a depth module selected from construction, geotechnical, structural, transportation, or water resources and environmental. Confirm with the Tennessee Board of Architectural and Engineering Examiners whether a state law, rules or jurisprudence component applies, since boards set these by rule.
How to verify a Tennessee civil engineer license
Verify a Tennessee professional engineer through the Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance using the tennessee department of commerce and insurance licence verification. Check that the licence is active rather than merely issued, because a lapsed licensee may not seal engineering documents and sealed drawings from one create problems at permit review and in any subsequent dispute. Where a firm is providing engineering services, check its business registration or certificate of authorisation as well, since that is a separate requirement in most states. GlobalCybers verifies licence status, discipline and firm registration before placing engineering staff.
How do you get a PE licence in Tennessee?
Earn a bachelor's degree from an ABET-accredited engineering programme, pass the NCEES Fundamentals of Engineering examination and register as an engineer in training, complete about four years of progressive engineering experience under a licensed professional engineer, pass the NCEES PE Civil examination with the depth module matching your practice, and
apply to the Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance. Tennessee licenses professional engineers through the Board of Architectural and Engineering Examiners at the Department of Commerce and Insurance — a combined board covering architects, engineers, landscape architects and registered interior designers, which is a different structure from the dedicated engineering boards found in larger states. The path itself is the national one: an ABET-accredited degree, the NCEES Fundamentals of Engineering examination, progressive experience under a licensed professional engineer, and the NCEES PE Civil examination with the depth module matching your practice. Tennessee's civil engineering work is shaped by its topography and hydrology — Appalachian terrain, karst geology across much of Middle Tennessee, and river and reservoir systems — and by a construction market growing quickly around Nashville. Confirm current experience, examination and comity requirements with the board.
Who licenses engineers in Tennessee?
The Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance. Tennessee regulates architects, engineers, landscape architects and interior designers through a single combined board, which keeps the design professions unusually close together here. That is the body to contact about applications, experience requirements, comity, business registration and
renewal, and its current rules govern — NCEES writes the examinations but licenses nobody. Requirements are set by rule and revised, so take them from the board rather than from any summary.
Tennessee Civil Engineer licenses, Frequently Asked Questions
Tennessee Board of Architectural and Engineering Examiners, Department of Commerce and Insurance · Tennessee Department of Commerce and Insurance, licence verification · NCEES, Fundamentals of Engineering (FE) exam · NCEES, PE Civil exam · NCEES Record, for comity applications · ABET, accredited engineering programmes · U.S. Bureau of Labor Statistics, OEWS May 2025 (17-2051). Fees and rules can change, confirm current details at www.tn.gov/commerce/regboards/aebc.html before applying.
Tennessee Board of Architectural and Engineering Examiners credentialed? Find a job.
We verify your Tennessee Board of Architectural and Engineering Examiners credential and match you with permanent employers in Tennessee. Renewal fees paid after placement.
Find Tennessee Civil Engineer Jobs →Your career research journey
Do your homework, then let the network do the rest.Get the job, then keep rising
FreeSet your intent, matching jobs come to you. No applying.
A roadmap to your next licence tier and higher pay band.
Once placed, we cover all certification, licence & career-guide fees.
Related · Civil Engineer
Everything for civil engineers in one place
Salary data, licensing, interview prep, and hiring, all cross-linked so you (and search engines) can move through the full civil engineer cluster.